Faults and Technical chat for the Discovery 5
tasts
Posts: 4 Joined: Tue Jan 09, 2024 5:52 pm
Post
by tasts » Tue Jan 09, 2024 6:14 pm
I am looking for information to transmission park release
procedure, I do not know from what year but mine (22year) do not have release lever .
Loz
Posts: 9 Joined: Wed Apr 19, 2023 5:49 pm
Post
by Loz » Thu Jan 18, 2024 6:59 am
I’m sure I read somewhere that there was a manual release cable that came up to a small lever under the engine cover. For recovery use.
tasts
Posts: 4 Joined: Tue Jan 09, 2024 5:52 pm
Post
by tasts » Thu Jan 18, 2024 6:35 pm
Older year has manual release cable, that right but mine do not have .
Loz
Posts: 9 Joined: Wed Apr 19, 2023 5:49 pm
Post
by Loz » Fri Jan 19, 2024 7:05 pm
I have access to the parts catalog, so I might have a look and see if the cable is still there.
Loz
Posts: 9 Joined: Wed Apr 19, 2023 5:49 pm
Post
by Loz » Sat Jan 20, 2024 11:30 am
I used my VIN MY23 and it is still there.
tasts
Posts: 4 Joined: Tue Jan 09, 2024 5:52 pm
Post
by tasts » Sun Feb 11, 2024 10:13 am
There is this link in the drawings, but in reality it is not. if you don't believe me you can go to your nearest dealer and get a hood new disco5.
Loz
Posts: 9 Joined: Wed Apr 19, 2023 5:49 pm
Post
by Loz » Sun Feb 11, 2024 12:09 pm
OK, if you don't have the cable, do you still have the lever on the gearbox?
tasts
Posts: 4 Joined: Tue Jan 09, 2024 5:52 pm
Post
by tasts » Sun Feb 11, 2024 2:11 pm
Only axle without the lever, you have to turn it and hold it because it is springy. You have to removing the cover under the gearbox in mud or snow .The whole difficulty is that you don't have easy access to it in emorgency case. Before it was you need only open the hood and pull cable.
Loz
Posts: 9 Joined: Wed Apr 19, 2023 5:49 pm
Post
by Loz » Mon Feb 12, 2024 6:14 pm
I see. It's not ideal, really. I guess if you needed it recovered, it would either be lifted or dragged up on a flatbed.