Tail gate decoration trim

All Discovery 5 related discussions
Post Reply
Disco5TX
Posts: 6
Joined: Sat Nov 17, 2018 6:12 pm

Post by Disco5TX »

eBay has a bunch of these for sale. I’ve seen one car or two with these around town. They look decent. However, I don’t see a cut out for the LR badge and the smaller badge below it. Vendor confirmed it doesn’t have those holes and that the badges need to go. How hard is it to remove badges and put them back on? Or alternatively I guess one could try to cut out the trim since made of ABS plastic. It seems like it’d be hard to get it right though.

https://rover.ebay.com/rover/0/0/0?mpre ... 2943577722

mordred1973
Posts: 16
Joined: Fri Aug 31, 2018 5:59 am

Post by mordred1973 »

dealer recently changed the O in discOvery on mine so I assume the TD6 and Oval come off as easily as will only be on sticky pads..
rm100
Posts: 26
Joined: Tue Feb 28, 2017 9:45 am

Post by rm100 »

Gently heat the badges up with a heatgun , low setting and pull fishing line behind it if you know what i mean , this takes them off, its only sticky pads .
Post Reply