Page 1 of 1

Tail gate decoration trim

Posted: Sun Jan 27, 2019 4:05 pm
by Disco5TX
eBay has a bunch of these for sale. I’ve seen one car or two with these around town. They look decent. However, I don’t see a cut out for the LR badge and the smaller badge below it. Vendor confirmed it doesn’t have those holes and that the badges need to go. How hard is it to remove badges and put them back on? Or alternatively I guess one could try to cut out the trim since made of ABS plastic. It seems like it’d be hard to get it right though.

https://rover.ebay.com/rover/0/0/0?mpre ... 2943577722

Re: Tail gate decoration trim

Posted: Wed Feb 06, 2019 10:34 am
by mordred1973
dealer recently changed the O in discOvery on mine so I assume the TD6 and Oval come off as easily as will only be on sticky pads..

Re: Tail gate decoration trim

Posted: Mon Sep 07, 2020 8:31 pm
by rm100
Gently heat the badges up with a heatgun , low setting and pull fishing line behind it if you know what i mean , this takes them off, its only sticky pads .