Delayed order due to my18 switch

Forum for Land Rover Customer Relations
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

CRC@LandRover wrote: Tue Oct 24, 2017 2:46 pm
Hi Whirling,

Thank you for your post.

I am sorry to learn of your comments and for any inconvenience that may have been caused.

I will be happy to investigate this further should you wish to provide your order number via PM.

Thanks,
Amellia
Hi Amelia - thank you for responding.

For now, I don't need the delay investigated as my dealer is working on this and as I said I am not in any particular hurry.

However - could you please post here to address the question of digital gauges. There seems to be some confusion around this based on assumptions and possibly some misinformation on other threads.

The interactive driver display which comes as standard on my HSE is not the dash gauges - is it? I don't know where the digital gauges rumour started - but could you advise if this is available please?

Thanks
whirling/

jimbg
Posts: 303
Joined: Fri May 19, 2017 8:30 am

Post by jimbg »

Scroll down to Explore Interior and you will see the digital gauges.

Not clear which models get it though!!
https://www.landrover.co.uk/vehicles/di ... index.html

Capture.JPG

jimbg
Posts: 303
Joined: Fri May 19, 2017 8:30 am

Post by jimbg »

Capture.JPG

The 'S' and 'SE' have the standard analogue display, As I have on my MY17 car.

The MY18 HSE and Lux have the digital display now called the Interactive Drive display.
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

Take a look at the standard features of the HSE on the landrover website - it says “Analogue Instrument Panel”

I would post a screenshot - but I don’t know how to using my iPhone :/
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

jimbg
Posts: 303
Joined: Fri May 19, 2017 8:30 am

Post by jimbg »

I saw that as well, but I think it is an error ( not unusual for LR!! )

I would say the PDF specification is right and that is the difference between the HSE and lower models.
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

jimbg wrote: Sun Oct 29, 2017 5:28 pm I saw that as well, but I think it is an error ( not unusual for LR!! )

I would say the PDF specification is right and that is the difference between the HSE and lower models.
I hope you are right - perhaps Amelia can clarify
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

Hi Amelia

PM sent a few days back asking if you could comment on this thread please - re posting here in case you have missed this.

Thanks
CRC@LandRover
Posts: 34
Joined: Wed Oct 04, 2017 7:19 am

Post by CRC@LandRover »

Good afternoon,

Thanks for your comments.

I am currently investigating this with our product team and will update you accordingly.

Thanks,
Amellia
whirling
Posts: 14
Joined: Sat Oct 14, 2017 4:34 am

Post by whirling »

CRC@LandRover wrote: Fri Nov 03, 2017 4:44 pm Good afternoon,

Thanks for your comments.

I am currently investigating this with our product team and will update you accordingly.

Thanks,
Amellia

Thanks Amelia

I look forward to hearing back.

Regards
Post Reply