Disco 5 full electric seats

Faults and Technical chat for the Discovery 5
Post Reply
GRUSS
Posts: 1
Joined: Sun May 01, 2022 6:04 pm

Post by GRUSS »

Evening

I’ve got some MY 2020/2021 full electric seats to go into my camper conversion.

I’m following a wiring diagram and have powered up the under seat module but still getting no response from any of the seat motors. No voltage on the output to the motors so suspecting the module is asleep?

I’ve been told these need a CAN msg to wake the module up?

Any help would be appreciated

Thanks

dgardel
Posts: 7
Joined: Fri May 07, 2021 9:32 am

Post by dgardel »

I believe that you must activate it by CCF editing (dealer), but not sure at 100%
MrElvis
Posts: 1
Joined: Mon Sep 12, 2022 7:33 pm

Post by MrElvis »

Hi Gruss
Did you ever get your seats working in your camper ?
crewbullet
Posts: 3
Joined: Thu Sep 29, 2022 1:57 pm

Post by crewbullet »

Hello, in order for the seats to start working, you need to connect according to the electrical diagram for these seats and edit the CCF. Otherwise, the seats will not work.
Greg@OME
Posts: 1
Joined: Thu Nov 16, 2023 3:12 pm

Post by Greg@OME »

crewbullet wrote: Thu Sep 29, 2022 3:04 pm Hello, in order for the seats to start working, you need to connect according to the electrical diagram for these seats and edit the CCF. Otherwise, the seats will not work.
Hey,
have you got the electrical diagram by any chance? Or anybody as a matter of fact?

G
Post Reply